zNSFW

Ohm

Always wear my Ohm (F)or good karma
My setup. Chi You clone, Tobh Atty (.26 ga dual coil inside), .39 ohms.
Twisted 28G Kanthal 5/4 dual coils on an IGO-T RDA. Reads about 0.3 ohms. Hits like
Liking this coil set up as I mentioned before it is a 0.4-0.7 ohm build local vape
Simplicity goes a long way. 24g 5 wrap quads at .1 ohms. Running with a VTC5 battery
Nothing fancy, 24g nichrome paralleled to 24g kanthal. 7 wraps with a 2.5mm inner
Dual 4x hand twisted 26ga kanthal wrapped around a 1/8" bit. .12 ohms on my
4 Strand 0.5x0.1mm Flat Kanthal Twisted 6 Wrap Dual Sleeper Coil - 0.45~ ohm
Dual Parallel ribbon clapton 24g/0.5 ribbon wrap. 0.1 ohm
100% Nickel Clapton, twisted 30gauge claptoned in 34 gauge, 0.054 ohms, an absolute
[NSFW] First build in my Mutation X v4: 5-wrap 20ga N80 dual coils, 3/32" ID,
Nickel Clapton, 32 gauge NI - 200 around 28 gauge NI - 200 .06 ohms. NSFW
Twisted 24ga Nichrome80; 4 wraps spaced; 1/8" ID; .08 ohm in my MX v4 NSFW
18 gauge for the first time... This stuff is THICK! (0.06 ohms)
Dual core ribbon Clapton, non-fused, 24g, 0.8mmx0.1mm, 0.17 ohms
28 over 26 nickel clapton. .04 ohm :)
I call it twisty twist wire 28x2 22x2 .06 ohms
22/36g Fused Claptons. 2.5mm ID, .08 ohms.
NSFW 24 AN80 with 38 N80 .651 ohms
Triple 24/32G Claptons .18 ohm - NSFW
18 gauge 5 wrap dual macro coil @.05 ohms NSFW
Twisted Clapton 24G kanthal / 32G nichrome on twisted messes .13 ohms
13 wrap on 2mm 28g ni200/36g n60 fused clapton. 0.066 ohm single coil. I'm finally
Dual 3 core Staples. 0.8x0.1 32awg wrap. .1 ohm on Samurai Bonzai
Nsfw .1 ohms staged heating clapton 4 wraps 2.4 mm diameter 24 ga core 28 ga outer
Fused Stapled Claptons - 0.12 Ohms - On my freshly polished Rig V2 in a V2 Comp Kennedy.
Basic builds seem to be hot. 6 wraps 22g ni80 staged with 5 wraps parallel 26g ka1.
24/40g n80 fused claptons. 4 wraps on 3mm, 0.085 ohm. Sitting in my new Mako Shorty.
EXTREMELY NSFW!!!!! 20 gauge nichrome 80, 5 wrap on 3mm quad coil. Sitting at 0.036
Ni200 Clapton 26ga wrapped in 30ga 0.081 ohms
First staged coil coming out at .12 ohms ?
NSFW!!! 24/36g fused Clapton, all kanthal. 7 wraps on 3mm, dual coil @0.177 ohm.
After much struggling here is my staple staggered fused clapton running a 0.09 ohms
We made some braided wire. It reads .06 5 wrap any ideas on how to make the ohms
My first build. 22 g. 5wrap. 45deg. .1 ohms
Quad 3wrap dragon, 24 a1. Super low ohm!
ADV 26g ti Claptoned with 32g kanthal 7 wrap dual in the Buddha v2 with modded airflow.
Dual framed staples in the Velocity Rda. .04 ohm
NSFW My h.o.g. v1 arrived so here's quad 18g coils in a fat boy rda. 0.04 ohms.
22 gauge quad coils in the Mutilator V3. This went on a Cherry Bomber. Bad idea,
First spaced Ni200 coil, 8 wraps, .06 ohms in a Royal Hunter atop a Cuboid 150
Hand twisted 2 strand 24g. 6 wraps 5/64 ID. Ohms out to about 0.4
Best build I've done in a while. Chain link 28 gauge 2.5mm ID with Scottish Roll
NSFW! I've heard how the Double Vision is super great for single coils. I tried one
Parallel 26/32 gauge A1, 24 gauge 316 stainless .12 ohm
She so thicc! Wide framed staple. 14 ply .5mm Ni80 x 26g Ni80 x 38g Ni80. Comes to
18 ply .5/24/42 framed staple. 4 wraps @3.5mm for a 0.056 ohm single coil.
Dripshot - 18 ply .5/24/42 Framed Staple, 4 wraps @ 3.5mm for 0.056 ohms
Stapled tiger helix - 6ply .3 ribbon framed with 28x.3 tiger wire and helixed with
First fraliens. 6x .3 + 28 wrapped in 36, all 316L 0.08 ohms.
Who says high mass doesn't work on mechs? NSFW!!! 0.06 ohm
Decent aliens, 0.10 Ohms
NSFW! Christmas has been busy so, Simple-Build Sunday? 21g n90, 0.044 ohm. NSFW!
Game of OHMs
Some quad core aliens up in here! (x4 26g SS316L x 36g Ka) Dual coil ohms out to
Frapliens. 6 ply .4x0.1, 28g frames, 36g wrap. 2.5mm ID .09 ohms. All Ni80
When you are a sub ohm While others are drippers
24awg SS 0.96 ohm black ceramic wick
Got some Juggernaut Kanthals. 0.15 ohms, 42w. Mod seems to overheat before I can
[WTS] [USA-FL] [H] "Stealth" Blacked-Out DT 770 PRO 250 Ohm [W] Paypal

category index

contact/abuse

zNSFW.com