Stapled tiger helix - 6ply .3 ribbon framed with 28x.3 tiger wire and helixed with 36. All 316l stainless. (0.07 ohms for dual 3mm id) zNSFW

http://imgur.com/SR2qBtY

User: prestidigit8or

Categories: Coilporn

This doesn't look right. Help!

Simplicity goes a long way. 24g 5 wrap quads at .1 ohms. Running with a VTC5 battery

Don't try this at home kids ;) Dual twisted 26g wrapped with ribbon wire.

Staged heating parallel build. 22g and 24g around a 3mm bit. Sorry about the close

24g triple twisted 4 wrap 0.1ohm (nsfw)

Diggin n80 (details in comments)

First try at parallel coils, got it down to 0.09

Build night. (A bit sloppy) Helix Clapton parallel?

26 ka1 4 strand twist core w/ 26 ka1 Clapton @ .06

NSFW. Quick Staggered Fused Clapton 26/32 on my Kennedy Comp. Reading in at 0.09.

Look at my dope ass schwire.

Fused Stapled Claptons - 0.12 Ohms - On my freshly polished Rig V2 in a V2 Comp Kennedy.

Spaced Ti Clapton: 22g Ti wrapped in 30 Ka 3mm 5 wrap .08 NSFW Velocity/IPV4

After much struggling here is my staple staggered fused clapton running a 0.09 ohms

My first build. 22 g. 5wrap. 45deg. .1 ohms

22 gauge quad coils in the Mutilator V3. This went on a Cherry Bomber. Bad idea,

First spaced Ni200 coil, 8 wraps, .06 ohms in a Royal Hunter atop a Cuboid 150

First Staged heating coil!

Not perfect. Still working on perfecting the staggered. Staggered fused, paralleled

First try at a parallel w/ clapton

NSFW 24G/34G Fused Clapton in the Lush Plus. SS316L, 0.9 Ω

Came back with some 4core (Ni90 core/Ni80outer) staggered fused claptons! 3.5mm ID,