zNSFW

Coilporn

First submission, first time trying twisted. 24g, 1.6ohms. Veritas RDA.
I can't get this wire up to a safe build.....(DONT FIRE IT)
Nothing fancy, 24g nichrome paralleled to 24g kanthal. 7 wraps with a 2.5mm inner
Clean Ni200 build in a Plume Veil on a Vapor flask clone
Lucky Number 0.07 (Quad coil 7-wrap 22g kanthal 0.07Ω on Mutation V2)
possibly NSFW just acouple of my recent builds, first is dual 4 wrap parallel coils,
Quad strand twisted (28g) flattened 4 wrap parallel at .1ohms
100% Nickel Clapton, twisted 30gauge claptoned in 34 gauge, 0.054 ohms, an absolute
24ga. Kanthal claptoned with .5 ribbon. Fused with 24ga. Kanthal using .5 ribbon
[NSFW] First build in my Mutation X v4: 5-wrap 20ga N80 dual coils, 3/32" ID,
Nickel Clapton, 32 gauge NI - 200 around 28 gauge NI - 200 .06 ohms. NSFW
28G pure nickel 4x twisted 0.05Ω DO NOT VAPE
30g Triple Twisted Ni200 .09ohm on plume veil
18 gauge for the first time... This stuff is THICK! (0.06 ohms)
Nickel fused clapton. 6 wraps 5/64 .032. Havnt seen one yet so i went for it. Do
I call it twisty twist wire 28x2 22x2 .06 ohms
22/36g Fused Claptons. 2.5mm ID, .08 ohms.
2nd Set of Dual Fused Claptons (NSFW)
[NSFW]26/36g fused clapton parallel to 2x28g twisted all N80
[NSFW] Staged Heating Parallel Clapton 0.1Ω, 24g/32g/23g KA1
Halloween Build: The "Mummy" Fused Clapton
Massive Alien, 22g cores/30g claps KA-1 at .09 ohms. Bonus coil I call the winch
Friend's second attempt at a fused Clapton and...can't use it ?
Nothing fancy just a ni200 26g spaced with a little color
Large Fused Claptons - 2x24awg Ni80/36awg A1, 3.8mm 5wrap
Triple coils on my new velocity 22g 8wraps each 3mm bit used
[NSFW] First actual good pair of fused claptons. 2x24SS/32KA1, 4.5 wrap, 3mm ID,
[NSFW] Used and Abused -- 32gg/24gg Clapton Parallel with Twisted 26gg
Staplestaggerton in the Phenotype-L
NSFW - Framed Staple 2x 26n80, 6x 0.1x0.5R Ka1, 36n80 - 5 wraps came out to a .06ohm
NSFW! I've heard how the Double Vision is super great for single coils. I tried one
NSFW! 0.1ohm, staggered clap with a twisted ribbon core, 26/32/0.3 in the Twisted
Staggered fused....again...... I'll get these perfect eventually.
NSFW Poor Attempt at Colours 24/36 NI80 Dual Staggered 2.4mm 0.09Ω
My Goon RDA build.
First Successful Dual Aliens, 26/36 N80, 2.5mm 6-wrap, .1Ω
Glows shot! Nsfw
She so thicc! Wide framed staple. 14 ply .5mm Ni80 x 26g Ni80 x 38g Ni80. Comes to
Dual 24g SS316L Core, 34g Kanthal Clapton, 5 wraps @ 0.06 (Unfortunately)
Fused Clapton with 23g SS 316L cores and 34g kanthal outer on the 30mm Norris
NSFW I spent two days trying to get these down
18 ply .5/24/42 framed staple. 4 wraps @3.5mm for a 0.056 ohm single coil.
Stapled tiger helix - 6ply .3 ribbon framed with 28x.3 tiger wire and helixed with
First fraliens. 6x .3 + 28 wrapped in 36, all 316L 0.08 ohms.
Who says high mass doesn't work on mechs? NSFW!!! 0.06 ohm
NSFW tsuka, finally nailed it on the 8th attempt, unfortunately.....
.09ohm NSFW frame staple Claptoned with .5 ribbon
Frapliens. 6 ply .4x0.1, 28g frames, 36g wrap. 2.5mm ID .09 ohms. All Ni80
Some hot aliens. (x2 24g SS316L x 38g SS316L) Resistance comes to .06 Posted up in
Aliens! First try at a triple core with 40g. (x3 26g SS316L x 40g Ni80) Resistance
Some wide aliens! [x6 28g Ni80 x 38g SS316L] Resistance comes to .07
Some pretty framed staples I made last weekend
[Nsfw]0.36ohm anti hive clapton.
Frame staple alien tsukas. .08 duals
Another angle on those framed staple tsuka aliens
3x26x36wrap on the Goon
2x24SS fused with 3 loop 36g SS vertebraid. Point zero stupid for my TS3.
Some series Aliens I did for an upcoming comp, 3x28g SS316L and 36g N80
Splish-Splash Pi2 taking a bath ?
Parallel Aliens in the TM2 from Twisted Messes LLC

category index

contact/abuse

zNSFW.com